Body: 2" thick chambered mahogany body with a ¾" flame maple top
Weight: This guitar weighs only 7-3/4lbs.
Comfort: it's comfortable under your forearm - the contours
are specially designed so they don't cut into your forearm

MapleCore™ Neck
US Masters proprietary MapleCore™ Neck with a thin mahogany skin maintains the classic set-neck appearance but provides the acoustical, dynamic, structural/mechanical and expressive performance only available from the more rigid quartersawn maple core which runs the entire length of the neck. Linear carbon fiber neck reinforcement provides additional stability

Premium Hardware
Tone Pros locking bridge and tailpiece
Sperzel Locking premium tuning machines
Graph Tech Trem nut

Standard Pickups and Switching
US Masters V2 dual humbucker pickup set with a
3-way toggle pickup selector, 2 volumes and 2 tones
Optional: 2 mini-toggle switches which coil tap
and alter the tone control voicing for each pickup

Carves & Contours
·Deep contour top - 9/16" deep carves
·Controls and switches recessed into top
·Scalloped heel to give clearance to the palm of your
 hand when you're playing at the top of the neck
·Rear relief contour allows the guitar to sit in against
your body and not cut into your ribs or chest

Interlocking Neck Joint™
US Masters proprietary Interlocking Neck Joint™
provides superior mechanical coupling between neck and body
and extremely large surfaces in full contact between neck and
body for the best possible integrity of the neck joint

The Way It Plays
US Masters proprietary Extended Uniform Neck Profile with a Low Profile Scalloped Heel allows unrestricted access to the entire fingerboard without a change in neck shape. It's a more responsive, intuitive feeling neck that helps you play with better mechanical efficiency. From top to bottom it's a consistent, uniform cohesive feeling neck, so you can concentrate more mental and physical energy on what you're playing, instead of how to physically accomplish it.

U.S. Masters Guitar Works is a product of M-Tec Corp.
2324 Pinehurst Dr. Unit B Middleton, WI 53562
608-836-5505 Fax:608-836-6530
These products are covered by U.S. Patents Nos. 5,886,272 & 6,051,765
The Following are Trademarks of U.S. Masters Guitar Works:
Compression-Set Captive Neck Joint · Contoured-Flex Truss Rod System · Contoured-Flex Neck Reinforcing Truss Rod System
Sportster · EP · SuperT · Punch Control · Ever-Tru Neck · Extended Uniform Profile · MultiVoice Tone Circuit
MVP MultiVoice Passive Tone Circuit · Studio Active Electronics · Live Active Electronics · Versatek
· Power Harness · U.S. Masters Guitar Works · U.S. Masters · The U.S. Masters Oval Logo